Nerf Rival Takedown Lever Action kit – by Shanye

85,00

Adding style points and tons of fun to your Nerf Rival Takedown with this lever action kit.

Now you can prime your Takedown like the Terminator (if you want ;))

Default for all parts is black PLA.
If you want a different colour, choose below.
Silky filaments are not recommended as they are to brittle!

Please note, the carbon parts are always black/grey-ish.

The replacement front barrel is NOT included in the kit. You can get that separately though.

12 in stock

Nerf Rival Takedown Lever Action kit – by Shanye

This kit transforms your Nerf Rival Takedown from a pump primed blaster to a lever primed blaster. Now you can prime your Takedown in style!

The kit includes a custom machined carbon fiber part in the lever to reinforce that section. All other parts are 3d printed.
You can choose the colours of your 3d printed parts as you wish however we do not recommend using silky filaments as they are to brittle. If you choose silk filaments you do so at your own risk.

This kit is build to be used with the stock spring. We have not tested it with any spring upgrades and recommend using the stock spring.

Hardware & Installation

This kit comes with all hardware needed for the installation.
Please check the hardware picture for reference.
You can find an installation tutorial on Youtube.

Tools required:
– Philips screwdriver
– Drill with 3mm drill bit: to drill two holes for the lever arms to attach
– Set of Allen keys for various screws
– Soldering iron or similar IF you choose to install the heat inserts yourself
– Maybe a small hammer or some plyers to help install the bolts

This kit does require to open the blaster nor to cut the shells.

The magical unicorn recommends these parts to you:

General Information:

– This part/kit is designed by Shanye and is fully licensed to sell in my shops.

– Blaster not included

– 3d printed parts will be made to order so allow 2-3 weeks production time

– Modify blasters at your own risk

– Rainbow Mods and Props is not responsible for any damage done to your blaster or yourself in the process of modification.

WARNING: Installing this mod changes the look of your blaster and although this does not necessarily look like a real firearm, it could be mistaken for one. As such it is completely the responsibility of the buyer in how it is handled. When installing mod kits make sure to add necessary precaution (orange tip, etc.) according to your local law and use responsibly.

Rainbow Mods and Props cannot be responsible if anything occurs as a result of this being handled as a real gun.

– Rainbow Mods and Props has no affiliation with Hasbro, Nerf or any of their respective affiliates.

 

Weight 0,275 kg
Dimensions 16 × 10 × 10 cm

You may also like…