The Scarlett Mk1 FILES ONLY
Want to print your very own Scarlett Mk1 dart blaster? Get your hand on the complete file set now and start printing. Print as many as you like for personal use only!
The Scarlett Mk1 is not an easy build for beginners and it requires precise 3d printing and some special hardware. Please read the description before you buy!
FILE VERSION – Digital files only! – There will be NO PHYSICAL PARTS OR BLASTER shipped to you! Once you bought the files we can not offer you a refund.
IMPORTANT:
By purchasing this digital product, you agree to the following:
– You may not redistribute the contents of this digital product
– You may not make alterations to this digital product
– You have unlimited personal use of this digital product
– You are eligible to receive potential updates for parts already included in this kit at no extra cost
– You may use the included files for building for others at cost of filament only
– You may not sell files or printed versions of them. If you are interested in a commercial license get in touch.
Scarlett Mk1 general information
The Scarlett Mk1 is a mag in grip, spring powered, pistol foam dart blaster which was build for LARP. It features a mag release, see through mag and grip (ammo counting), a working slide lock and a slide return spring. It was build around the RMP5 spring and gets max LARP-performance by German standards (100 fps cap). With this it is also perfect as a secondary for any CQB game scenario.
Since it was build for LARP it looks more realistic then other blasters. If you choose to have it print in dark colours and/or paint it to look more realistic you have to be aware of the consequences when using this outside of private LARP games. If you want this for your Nerf collection I highly recommend using bright colours. Rainbow Mods&Props can not be held responsible if you choose to do otherwise.
For more information on the Scarlett, watch this video!
HARDWARE & INSTALLATION
I have a very in depth build guide video which should help you build your blaster.
Note: The Scarlett is not a beginners build. It is an advanced blaster to put together and has very little tolerances due to its space limitations.
Tools required:
– Set of Allen keys
– Philips head screwdriver
– tweezers and/or plyers
– hobby knife
– soldering iron (for heat inserts)
– super glue
– epoxy glue
– Some lube (silicon based or lithium grease or something similar)
Hardware needed:
– This list includes all the hardware you could possibly need. Depending on your build you might need less. –
Screws
8x M2x5mm countersunk – use: grip scales
5x M2x8mm countersunk – use: Mag bottom, slide lock
2x M2x20mm countersunk – use: Picatinny Rail (optional)
1x M2.5x6mm raised countersunk – use: mag follower (you can re-use old Nerf internal screws)
2x M3x8mm countersunk – use: Turnaround
1x M3x20mm countersunk – use: Pusher
2x M3x20mm cylinder head – use: catch assembly
Heat inserts
7x M2x4mm (Ruthex) – use: 4 x mag/ 1 x slide lock/ 2 x picatinny Rail
5x M3x5,7mm (Ruthex) – use: 2 x turnaround/ 1 x pusher/ 2 x slide
Springs
trigger: 1x 0,5mm x 17mm x 5mm (OD) – or similar
mag release: 1x 0,3mm x 7mm x 4mm (OD) – or similar (very small spring)
catch: 1x 0,25mm x 15mm x 4,8mm (OD) – or similar
main spring: 1x RMP 5 Gecko spring (1,6mm x 110mm x 17,7mm (OD)) – or similar
slide return spring: 1x RMP Gecko Slide Return spring (1,1mm x 76mm x 19mm (OD)) – or similar
magazine spring: 1 RMP Magazine spring – or similar (e.g. Worker mag spring for short mags)
O-rings
1x 9x2mm
1x 19×2,5mm
Other
plunger pad: 1x 20x2mm
plunger: RMP one piece Delrin plunger is recommended, but you can try and print/make your own.
plunger tube: 1x 25×0,5x68mm – we use a carbon tube, but you can use any tube with 0,5mm wall thickness
catch tube: 1x 48mm KS140 brass OR 48mm 14x1mm aluminum (still being tested)
barrel: 1x RMP Scarlett/IMP barrel 161mm 16×1,5mm – IMPORANT: The barrel needs at least the 9,5mm air hole for the turnaround (see picture) to work. Also the rear end needs to be drilled out to 14mm ID to fir the pusher and o-ring.
PVC mag window: 1x RMP Scarlett/IMP mag window (61,7×9,6x2mm) – This piece is fully optional, but useful to prevent dirt from falling into your blaster but insuring a good view on the darts left in the mag.
THE MAGICAL UNICORN RECOMMENDS THESE PARTS TO YOU:
GENERAL INFORMATION:
– This blaster was designed by Joshi and Rainbow Mods&Props and is fully licensed to be sold in my shops.
– Pictured Blasters not included
– Scarlett Mk1 kits/blasters will be made to order so allow 2-4 weeks production time
– Modify blasters at your own risk
– Rainbow Mods and Props is not responsible for any damage done to your blaster or yourself in the process of modification.
– WARNING: Installing this mod changes the look of your blaster and although this does not necessarily look like a real firearm, it could be mistaken for one. As such it is completely the responsibility of the buyer in how it is handled. When installing mod kits make sure to add necessary precaution (orange tip, etc.) according to your local law and use responsibly.
– Rainbow Mods and Props cannot be responsible if anything occurs as a result of this being handled as a real gun.
– Rainbow Mods and Props has no affiliation with Hasbro, Nerf or any of their respective affiliates.
Reviews
There are no reviews yet.