Hardware Kit for Scarlett Mk1 blaster

Scarlett Mk1 Hardware kit – HARDWARE ONLY!

This is the hardware kit for the Scarlett Mk1 foam dart blaster which includes everything you need to build this beauty yourself.

The amount of hardware needed will vary on your build, but everything is included to build the blaster in any configuration shown in the pictures.

Make sure to check out the files as well as the build guide video before purchasing the parts.

This kit includes ONLY the hardware. You will need to purchase the files and print them yourself in order to complete the blaster!

SCARLETT MK1 GENERAL INFORMATION

The Scarlett Mk1 is a mag in grip, spring powered, pistol foam dart blaster which was build for LARP. It features a mag release, see through mag and grip (ammo counting), a working slide lock and a slide return spring. It was build around the RMP5 spring and gets max LARP-performance by German standards (100 fps cap). With this it is also perfect as a secondary for any CQB game scenario.
Since it was build for LARP it looks more realistic then other blasters. If you choose to have it print in dark colours and/or paint it to look more realistic you have to be aware of the consequences when using this outside of private LARP games. If you want this for your Nerf collection I highly recommend using bright colours. Rainbow Mods&Props can not be held responsible if you choose to do otherwise.

Scarlett hardware list

– This list includes all the hardware you could possibly need. Depending on your build you might need less. –

Screws

8x M2x5mm countersunk – use: grip scales
5x M2x8mm countersunk – use: Mag bottom, slide lock
2x M2x20mm countersunk – use: Picatinny Rail (optional)
1x M2.5x6mm raised countersunk – use: mag follower (you can re-use old Nerf internal screws)
2x M3x8mm countersunk – use: Turnaround
1x M3x20mm countersunk – use: Pusher
2x M3x20mm cylinder head – use: catch assembly

Heat inserts

7x M2x4mm (Ruthex) – use: 4 x mag/ 1 x slide lock/ 2 x picatinny Rail
5x M3x5,7mm (Ruthex) – use: 2 x turnaround/ 1 x pusher/ 2 x slide

Springs

trigger: 1x 0,5mm x 17mm x 5mm (OD) – or similar
mag release: 1x 0,3mm x 7mm x 4mm (OD) – or similar (very small spring)
catch: 1x 0,25mm x 15mm x 4,8mm (OD) – or similar
main spring: 1x RMP 5 Gecko spring (1,6mm x 110mm x 17,7mm (OD)) – or similar
slide return spring: 1x RMP Gecko Slide Return spring (1,1mm x 76mm x 19mm (OD)) – or similar
magazine spring: 1 RMP Magazine spring – or similar (e.g. Worker mag spring for short mags)

O-rings

1x 9x2mm
1x 19×2,5mm

Other

plunger pad: 1x 20x2mm
plunger: RMP one piece Delrin plunger is recommended, but you can try and print/make your own.
plunger tube: 1x 25×0,5x68mm – we use a carbon tube, but you can use any tube with 0,5mm wall thickness

catch tube: 1x 48mm KS140 brass OR 48mm 14x1mm aluminum (still being tested)

barrel: 1x RMP Scarlett/IMP barrel 161mm 16×1,5mm

PVC mag window: 1x RMP Scarlett/IMP mag window (61,7×9,6x2mm)

THE MAGICAL UNICORN RECOMMENDS THESE PARTS TO YOU:

• Scarlett Mk1 file set
• IMP 22 file set
• IMP 22 hardware kit

GENERAL INFORMATION:
– Blaster not included
– Modify blasters at your own risk
– Rainbow Mods and Props is not responsible for any damage done to your blaster or yourself in the process of modification.

– WARNING: Installing this mod changes the look of your blaster and although this does not necessarily look like a real firearm, it could be mistaken for one. As such it is completely the responsibility of the buyer in how it is handled. When installing mod kits make sure to add necessary precaution (orange tip, etc.) according to your local law and use responsibly.

– Rainbow Mods and Props cannot be responsible if anything occurs as a result of this being handled as a real gun.
– Rainbow Mods and Props has no affiliation with Hasbro, Nerf or any of their respective affiliates.