The Gecko Carbine Kit – FILES ONLY
Introducing the Gecko Carbine Kit. This kit will upgrade your Gecko to have a solid shoulder stock. Wobble free and fully integrated in your blaster.
This Kit was designed by Ehdrien and myself and I am super happy how it turned out. If you want to know more about the kit, check out this video.
Since the Gecko Carbine kit will not work with your original Gecko frame it comes with your choice of upgraded rear frame. These frames also have the same upgrades as the Gecko 2.0 rear frames. Due to the positioning of the rods that hold the stock, the Gecko Carbine kit does not work with any aftermarket mag releases and need the original mag detent. if you don’t have that one in your Gecko, make sure to select it here.
FILE VERSION – Digital files only! – There will be NO PHYSICAL PARTS OR BLASTER shipped to you! Once you bought the files we can not offer you a refund.
IMPORTANT:
By purchasing this digital product, you agree to the following:
– You may not redistribute the contents of this digital product
– You may not make alterations to this digital product
– You have unlimited personal use of this digital product
– You are eligible to receive potential updates for parts already included in this kit at no extra cost
– You may use the included files for building for others at cost of filament only
– You may not sell files or printed versions of them. If you are interested in a commercial license get in touch.
Files included:
– Stock and Stock cap
– Standard frame & RMR frame
HARDWARE & INSTALLATION
To complete this kit you will need additional hardware, which varies depending on your choices:
– 2x 8x1mm aluminum or carbon rods (length up to you, ideal around 20cm)
– 2x M2 heat inserts
– 6-8x M3 heat inserts
– 4x M3x12mm screws
– 2x M3x25mm screws
– additional screw depending on your sight choice
You will have to take your Gecko apart to swap these. Check out this video here for some help!
Take off your grip scale and the rear frame. Install your old mag detent or the new one into the stock rear frame. Put the blaster back together.
Now insert the rods into the holders in the rear frame, clamp on the stock parts and screw one the back plate. Now check for length. If the length is fine glue the rods into the holes in the frame (DON’T glue them into the stock clamp).
If you need to adjust the length, take out the rods, cut a little bit of and try again. NOTE: it’s better to cut smaller sections than cut to much at once 😉
Tools required:
– Allen keys
– Philips Head Screwdriver
– Epoxy glue
– metal saw
– soldering iron
THE MAGICAL UNICORN RECOMMENDS THESE PARTS TO YOU:
GENERAL INFORMATION:
– The parts are designed by Ehdrien and Rainbow Mods&Props and are fully licensed to be sold in my shops.
– Blaster not included (unless stated otherwise)
– 3d printed parts will be made to order so allow 2-3 weeks production time
– Modify blasters at your own risk. All modifications done using blasters, parts and products should be done by an adult or with adult supervision.
– Rainbow Mods & Props is not responsible for any damage done to your blaster or yourself in the process of modification.
– WARNING: Installing mods might change the look of your blaster and although this does not necessarily look like a real firearm, it could be mistaken for one. As such it is completely the responsibility of the buyer in how it is handled. When installing mod kits make sure to add necessary precaution (orange tip, etc.) according to your local law and use responsibly.
– Rainbow Mods & Props cannot be held responsible if anything occurs as a result of this being handled like a real gun.
– Rainbow Mods & Props has no affiliation with Hasbro, Nerf or any of their respective affiliates.
Reviews
There are no reviews yet.